Book a demo

See DynamxMFG running on
your shop floor data.

Start with a 30 minute conversation. We work through how your factory runs today and where time is being lost, then show you DynamxMFG live on a working demo site. If it looks like a fit, we configure it on your own data and demo that back to you.

★★★★★4.1/5 on Capterra, GetApp & Software Advice

Pick your slot

Choose a 30 minute slot that suits you

Straight into the diary. You will get a confirmation with everything we need from you beforehand.

Prefer email? Write to sales@totalcontrolpro.com and we will find a time.

What you will see

Thirty minutes, three things that matter

We walk the system live on a working demo site, so you can see how it behaves before anyone talks about configuring anything.

Where every job actually is

Live tracking across every job, machine and operator. We run it against a real order so you can see what your Monday morning meeting would look like.

What each part really costs

True labour and material cost captured as the job runs, not estimated weeks later. This is usually the moment the room goes quiet.

How your team would use it

The Smart Worker Interface on a tablet. Book on, book off, log progress. If your operators would not use it, nothing else matters.

What happens next

No surprises, no runaround

Two sessions. The first is a conversation, the second is your factory on screen.

Book a 30 minute call

We talk through how production runs today and where the time is going, then show DynamxMFG live on a working demo site. Nothing needed from you beforehand.

We configure it on your data

If it looks like a fit, we take one bill of materials and a real order and set DynamxMFG up around how you actually build.

We demo it back to you

A longer session on your own build, going properly into the bottlenecks you raised, with the people who would be using it day to day.

“As GMC has grown, it had become harder to have such a keen view on components to see if those parts were profitable or not. DynamxMFG enabled us to monitor machine time and see whether we’re making a profit or a loss on each component.”

Paul B, Managing Director, Gloucestershire’s Machining Centre · 40% increase in production capacity

Read the case studies

Before you book

The questions we get asked most

How long is the first call?

Thirty minutes. That covers how you run production now, where time is being lost, and a live look at DynamxMFG on a working demo site. If it looks like a fit we book a second, longer session on your own data.

Is this a sales pitch?

No. The first call is mostly us asking questions about how you build. If DynamxMFG is not right for how you manufacture we will say so on the call rather than waste your time or ours.

Who should join the call?

Whoever feels it day to day. Usually a production or operations manager, often with the MD or finance if job costing is the driver. One person is enough for the first conversation.

What do you need from us beforehand?

Nothing for the first call. For the second session we ask for one bill of materials and a real order that is typical of your work. Nothing commercially sensitive, and we can anonymise part names if you prefer.

What happens in the second session?

We configure DynamxMFG around your bill of materials and a real order, then walk it back through with you. That session goes properly into the bottlenecks you raised first time round, and usually involves the people who would actually use the system.

What if we are not ready to buy?

That is fine and it is common. Plenty of manufacturers look six to twelve months ahead of a decision. You will still come away with a clear view of what the system does and where it would fit.

How quickly could we be live?

Ninety days. We configure DynamxMFG around how your factory already runs, and it works alongside Sage, Xero or QuickBooks rather than replacing your accounts.