Run every job, every day, on a single MES platform.

DynamxMFG is the Manufacturing Execution System that connects your office to your shop floor. Work orders, routings, kitting, and live tracking, all in one place. No more spreadsheets, paper travellers, or chasing operators for status.

THE PROBLEM

Your ERP plans the work. But who actually runs it?

An ERP knows what should happen. It does not know what is happening. Manufacturers fill that execution gap with paper travellers, whiteboards, and a daily 8am huddle – and most jobs slip a day before anyone notices.

Travellers tell yesterday’s story

Paper travellers and ticked-off spreadsheets only show what has already happened. By the time the office sees a problem, the shift has finished and the next one has started.

Routings live in someone’s head

The “right way to make this part” is held by your most experienced operator. When they’re off, every job takes longer and quality drifts. There is no system to fall back on.

No live data, no live decisions

Without live work order status, you can’t reschedule, reprioritise, or rebalance work centres until the damage is already done. Reactive becomes the default.

WORK ORDERS & ROUTINGS

Every job has a route – and the system knows it

When a sales order is released, DynamxMFG creates the work order automatically and applies the routing held against the item’s Manufacturing BOM. The shop floor sees the operations in the right sequence, with the right materials allocated, every time.

Need to change a routing on the fly? Edit the BOM, click “Deploy Changes” and the update propagates to every open work order using that build. The master record stays canonical – the floor stays current.

KITTING, BATCHING & BUNDLING

Run jobs the way your shop floor actually runs them

Real factories don’t work one part at a time. Operators kit before they start. They batch identical parts at the heat treater. They bundle small items through finishing as one unit. DynamxMFG handles all three natively – so the system matches the floor, not the other way around.

Choose Sequential or Simultaneous batching at any operation. Bundle small parts so they track as a single unit through the whole route. Kit materials at start of build with a guided pick list. The shop floor sees one clear instruction at every step.

LIVE SHOP FLOOR TRACKING

Live status from every operation, every machine, every operator

Operators clock in and pick up their next job from the Smart Worker Interface, a touchscreen-friendly shop floor interface. The moment they start an operation, the office sees it. The moment a job stops, the manager knows why.

Estimated vs actual times update live. Stoppage reasons are captured at source – not reconstructed afterwards. End-of-Line screens display live order status across the floor so everyone sees the same picture, from the office to the bench.

From released work order to completed build

Every step connected, every status live – the office sees what the floor sees.

Want to see the MES running with your part numbers?

Book a 15 minute demo and we will walk through it using a routing that matches one of your real builds.

ALSO INCLUDED

Everything else that comes with the MES

The execution details that turn a planning system into a system your shop floor actually uses every day.

Manufacturing & Design BOMs

Two-layer BOM model. Design BOM lists every possible material. Manufacturing BOM defines what is actually consumed at each routing operation.

Per-order snapshots

Lock a build version against an order. Customise materials or operations for that specific job without affecting the master record.

Stoppage reason analysis

Operators record a reason every time they pause. The Stoppage Reason Analysis report turns that into actionable improvement data.

Rework & remake

Configurable rework templates. Trigger a rework loop from any operation. Full traceability of what was reworked, when, and by whom.

Clocking station & EOL

QR-badge clocking station at the entrance. Wall-mounted End-of-Line screens showing live order status across the floor.

Auto-allocate, auto-consume

Materials allocated to work orders the moment they are created. Auto-consume removes the need for manual picking at every step.

INTEGRATIONS

Your MES, your accounts system, your CRM: connected

DynamxMFG plugs into Sage and Xero so finished work orders flow into the books automatically. The Print Connector pushes traveller sheets and stock labels to printers without an extra middleware layer.

Need a custom hook? The Data Transfer Application (DTA) and public REST APIs cover Customers, Sales Orders, Purchase Orders, and Suppliers, so DynamxMFG sits cleanly in your existing stack.

Logos of productivity and business software applications.

See your factory running through DynamxMFG

Book a 15 minute demo. We will show you how your jobs would flow through the MES – using a routing built from one of your real parts, not ours.